background image

visit us at:

www.galaboats.com

c) Maintenance of stainless steel: 

x

 

We use only top quality stainless steels, which are resistant to 
corrosion. However, it is not permanent and maintenance is required: 

o

 

Avoid contamination and scoring its surface, 

o

 

Frequently wash with fresh water, 

o

 

Grease and mirror polish it regularly. 

x

 

Once you see the sign of rust – clean and mirror polish this place. 

d) Maintenance of the aluminium and marine ply elements and floor: 

x

 

Wash the seats and floor with soap and fresh water, and dry 
thoroughly. Paints and varnishes not only are decorative elements, 
they also protect the material. 

x

 

Repaint flakes or scratches on the surface with proper paint. 

x

 

If you see any sign of corrosion or scratches – clean it, remove any 
corrosion signs and protect the area with proper paint. 

e) Winterizing and storage 

x

 

When storing your boat, keep it in a clean and dry place that is not 
affected from major variations in temperature and other factors.  

x

 

You may store the boat: 

o

 

Deflated and rolled up in its bag. 

o

 

Assembled and slightly inflated, covered with the cover, 
which protects against direct sunlight, dirt, dust and pollution. 

x

 For 

winterizing: 

o

 

Clean and dry the boat, all foam and wooden elements, 

o

 

Completely drain the water out of the hull. 

o

 

Grease all metal moving parts and connections, incl. steering. 

o

 

Properly close the fuel system to avoid any vapor leak. 

o

 

Keep the boat breathable. Use breathable canvas. 

o

 

Winterize the motor, following the instructions for the motor. 

 

 

CAUTION 

 

 

1.  DO NOT STORE THE BOAT NOT COVERED. 
2.  STORE THE BOAT AWAY FROM RODENTS. 
3.  AVOID SHARP FOLDS OF TUBE MATERIAL. 

e) Regular inspections

x

 

Check frequently the tightness of the screws and nuts, particularly the 
motor's bolting to the transom and steering system elements. 

x

 

Regularly examine your fuel system, replace old damaged elements 
and check the tightness of the clamping rings. 

16. CONTACTS AND SERVICE  

Our service network assures you a dependable service. With any questions 
related to boat design and use, maintenance and repairs, parts and materials 
supply please contact your local GALA Dealer or Importer.  You may find the 
list of them at our international web-site:    http://www.galaboats.com 

- 16 -

Summary of Contents for A Series











Reviews: