ELEMENT AND CONTROL SETTING
9
ELEMENT AND CONTROL SETTING
HEATING ELEMENTS
TEMPERATURE LIMITERS
Each radiant element has its own temperature limiter (sensor)
to protect the glass cooking surface from extreme high
temperatures. The temperature limiter operates automatically
by cycling the element to match the heat to the Temperature
setting of the element (HI to LO).
SINGLE RADIANT ELEMENT
This type of electric element uses a wire ribbon located under
the glass surface to provide the heat for cooking. The
temperature limiter will cycle the element on and off.
Turn the knob from LO to HI temperature (or any temperature
in between).
DUAL RADIANT ELEMENT
The dual element consists of two radiant ribbon elements
within the same element. Either the small (inner element) or
both (inner and outer) elements may be selected for use.There
HYLHUPUэUP[LU\TILYVMOLH[ZL[[PUNZIL[
ween the LO and HI
position. Fixed positions are found at LO an
K/0[VKLэUL
minimum and maximum heat setting.
To turn ON the inner element,
push down on the control knob
and turn it counterclockwise following the single line graphics.
To turn ON both inner and outer elements together,
push down
on the control knob and turn clockwise following the double
graphics line.
HOT SURFACE INDICATOR LIGHT
Each element features a hot surface indicator light to show
when the cooking area is ON or hot. The signal light will turn
on automatically in the area marked with a circle.
The light remains on as long as the surface cooking area is too
hot to touch even after the surface cooking area is turned off.
Summary of Contents for GL1FR24ASSARN
Page 15: ...OVEN USE OVEN USE 14...
