CLEAN AND CARE
Cleaning and replacing the filters
Cleaning the grease filters
Clean the filters at least once a month. Never use the fan or microwave without the filters in place.
1
Pull down slightly on the tab toward the front of the microwave to remove the filter. Repeat for the other filter.
2
Soak the filter in a sink or dish pan filled with hot water and detergent.
CAUTION
DO NOT use ammonia or other alkali. They will react with the filter material and
darken it.
3
Agitate and scrub the filter with a brush to remove embedded dirt.
4
Rinse thoroughly and shake dry.
5
Replace by fitting the filter back into the opening.
Grease filters
BOTTOM
Replacing the charcoal filter
A charcoal filter is used for nonvented, recirculated installation. The filter should be changed every 6 to 12 months
depending on use.
1
Disconnect power to the microwave at the circuit breaker or by unplugging it.
2
Remove the louver mounting screws from the top center of the louver, then push down on the tabs at each end
of the louver to disengage it.
Louver mounting screws
Louver
3
Pull the louver away from the unit.
18
