6
7
8
5
Unpack , repack and carry
Please memorize the position of each accessory of the appliance
when unpack it, repack the product and check it carefully before
transportation.
Do not lift or pull the door or the door handle during transportation.
When moving, the appliance can not be sloped over 45 degrees
(the angle to the vertical direction). Please avoid strong vibration
and hit.
PACKING AND MOVING
1.
2.
3.
The appliance should be maintained and cleaned frequently. For your safety,do
please pull the plug out of the socket before the cleaning.
Interior maintenance
Clean the interior of the appliance with clean water or neutral abluent.Scour it with
clean water and wipe it with a piece of dry cloth.
Maintenance of door gasket
It is easy to damage if the door gaskets are polluted by the stain like oil, sauce and
etc., so it is better to clean them carefully.
Outer maintenance
Wipe the dusty with a piece of dry cloth ,clean it with neutral abluent if necessary.
MAINTENANCE
1.
2.
3.
FREEZER CONTROL
If
the
refrigerator’s lower tempreature is needed, please regulate the konb
along
the“COLDER”direction;contrarily, regulate the konb along
the COLD”direction
.
Note: Regulate the konb to set the freezer temperature as you desire. Always wair
24 hours after any adjustment to reach the desired
temperature.
“
USER NOTIFICATIONS
Do not splash water on the refrigerator, as it will cause oxidation and malfunction.
Electronic component such as on/off button should be wiped dryly.
Cleansers such as soap powder, abrasive cleaning powder, alkali cleansers, chemical
cloth, thinner, alcohol, acid petroleum productand hot water should not be used to
clean the refrigerator as they may damage the painted cover and plastics.
Smear can damage the interior plastic component, so wipe it as soon as possible.
1.
2.
3.
DEFROST
DISCONNECTING THE APPLIANCE
In a general condition, do not stop the appliance in case of affecting
its life. After unplugging the power, please leave at least 5 minutes
before resumption.
Attention
Discontinuation during power failure
After power failure, do not put additional food in the appliance and reduce the frequency
of door opening.Make several ices in a container if know the power failure beforehand,
and put it in the top of the fridge.
Discontinuation during vacation
Please fetch out the easy-rot food and the food in fridge before shot vacation. After
confirmation, close the door firmly.If have a long vacation, please fetch out all the food
and cut off the power. After defrosting, clean up the liner of the appliance and wipeit dry,
and leave the door open.
Stop using
If the refrigerator may be stopped using for a long time, please unplug the outlet and
clean up the appliance. The door should be kept open in order to prevent unpleasant
smell caused by food leavings.
1.
2.
3.
After power failure, even in summer, the refrigerator can store food normally in several
hours.
Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer
Defrost of refrigerator will be executed automatically during product running, so it
is no requirement for manual defrost. The defrost water flows into the vaporization
plate and will be vaporized by the heat of compressor. So its drain tube must be cleaned.
Warning
PACKING LIST
Note:
Products are subject to improve from time to time, any
changes in parts without further notice.
Number
Parts
Shelve
Crisper glass cover
Vegetable crisper
Rod
Cola bar
Bottle protector
Owner's manual
4pcs
1pcs
1pcs
5pcs
3pcs
2pcs
1pcs
9
SPECIFICATIONS AND PARAMETERS
Climate class
Electric shock protection type
Capacity (
)
cu.ft
Freezer
Freezer
Refrigerator
Voltage (V)
Frequency (Hz)
Current (A)
Voice [dB(A)]
Energy consumption (kW.h/24h)
Refrigerant
Weight (
)
lbs
Interior
temperature ( F)
Dimension (inch)
Width
Depth
Height
Refrigerator
o
T
I
115
60
1.2
R600a/1.41oz
139.99
32~46.4
< 45
0.855
9.36
23.74
29.45
66.93
2.65
< 5
The follow cases are not malfunction
Moisture may form dew on the outside of the product during the
humid season, just
get it wiped.
The frame of the appliance will be warm during working by the defrost pipeline inside
it.
Please check the points above first.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
The flow of refrigerant through the pipeline coil can cause a bicker.
It is normal that the sides of product get warm as a result of the cooling pipeline
working.
1.
2.
4.
3.
Refrigeration Sensor Failure
1
2
3
4
Defrost Sensor Failure
Fan Failure
Overheating Failure
●●○○○
○●●○○
○○●●○
●○○○○
○●○○○
○○●○○
○○○●○
○○○○●
No
Defect
LED1-LED5
Description
Indicated LEDs will flash
intermittently at 0.5s
intervals.
One of Indicated LEDs will
flash intermittently at 0.5s
intervals.
Disgusting odour happens
Food with strong odour should be packed tightly before being put inside the appliance.
Please check whether there is any deteriorated item or whether the liners are left dirty
for a long time.
5.
Water leaks from the bottom of the refrigerator
The drain tube is jammed. Please use a proper tool to solve it.
6.
Heavy frost occurs on the rear of the appliance
Putting humid or hot food into the appliance may cause this problem. Or it may be
caused by the heavy environment moisture.
7.
The compressor keeps working for a long period
The environment temperature may be too high. The doors may be opened frequently
or even they are left open. The temperature control knob setting in (4-5) state may
increase the working time of compressor.
4.
TROUBLESHOOTING TIPS
The refrigerator
work
It may not be connected to the power supply(plug, power cut or fuse); Voltage is too
low.
does not
1.
The refrigerator does not work efficiently as expected
It may be caused by heavy frost, or by warm temperature setting,or by frequently door
operating.
2.
It makes unusual noise
It may be caused by an imbalance or loose ground locating the appliance, or by
resonation between the appliance and other ambient objects.
3.
Please get rid of the gasket of the door before the disposal.
The disposed apparatus should be handled by professional
staff, as it may be harmful to the environment.
Warning
Please check the points below after maintenance:
(1) Is there any damage or loss of the electronic wire ?
(2) Can the plug be put in the socket reliably and smoothly?
(3) Is the plug heating unconventionally?
4.
10
