7
8
CARE & MAINTENANCE
TROUBLESHOOTING
The machine doesn't work
Check if the plug is in good contact with the socket.
Check if the rise button spring back in place.
Check if the machine works continuously more than 6 minutes,
and wait until the motor cools down.
Noise in the mixing bowl when working (the
accessory scraped the bowl)
Check if the mixing bowl is properly installed.
Check if the accessory is installed properly on the machine.
The pot cover doesn’t fit the mixing bowl
properly
Check if the splash guard placed on the machine properly.
Check if the mixing bowl is installed properly on the machine and
locked correctly.
The machine doesn’t work on certain
speeds
Check if the mark on the speed knob corresponds to the speed
setting on the housing.
Rotate the speed knob to 0, and re-check if the machine works.
Movements when the machine working
·Check if the anti-slip feet fell off.
·Check if the machine is placed on a smooth and flat tabletop.
The rise button won't spring back in place
after installing the mixing bowl and pot cover
·Check if the splash guard is placed on the machine properly.
·Check if the mixing bowl is properly installed.
CARE & MAINTENANCE
TROUBLESHOOTING
Dispose of the device over a registered waste disposal firm or
through your communal waste disposal facility.
Observe the currently valid regulations. In case of doubt, consult
your waste disposal facility.
Do not dispose of the device in normal domestic waste.
Disposal
Before cleaning remove the plug from the socket.
Never immerse the motor in water.
Do not use any sharp or abrasive detergents.
Only a damp rinsing cloth should be used to clean the outside of the
housing.
Components that have come into contact with food can be cleaned
in soapy water.
Allow the parts to dry thoroughly before reassembling the device.
Motor Housing
Mixing Bowl, Mixing Equipment
The components are not suitable for cleaning in a dishwasher. If
exposed to heat or caustic cleaners they might become misshapen
or discolored.
CAUTION:
Cleaning
1
NO.
Troubles
Solution
2
3
4
5
6