11
BASIC CONTROLS
When the oven first plugged in, the display will show
“12:00” and “:” flashing.
When cooking setting is interrupted for 1 minute, the system will back to the standby mode
automatically.
During cooking, if press STOP/CANCEL pad once or open the door, the program will be
paused, then press START/ADD 30 SEC pad to resume, but if press STOP/CANCEL pad
twice, the program will be canceled.
After ending cooking, the system will sound beeps and
“END” will display to remind user
every two minutes until user press STOP/CANCEL pad or open the door.
Before operating your new microwave oven, please read and understand this operation
manual completely.
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, please check and try again.
TO SET THE CLOCK
This is a 24 or 12 hour clock, and you can
select it by pressing CLOCK pad.
Suppose you want to enter 5:00 pm.
1. In standby mode, touch CLOCK pad once,
“
Hr 12
” will display, touch CLOCK pad
again
“Hr 24” will display.
2. Press number pads 5, 0, and 0,
”05:00”
will display in the screen.
3. Touch START/ADD 30 SEC to confirm
Note:
During cooking, you can press CLOCK
pad to check the clock.
“00:00” will display and two beeps will sound
to remind user to resume load the time, if you
enter time is beyond the scope the clock
when you set the clock.
MICROWAVE COOKING
For microwave cooking, press COOK TIME
pad and then press number pas to enter
cooking time, after that, press POWER
LEVEL pad and then use number pads to
select power level you desired. There
are 11 power levels for you to choose. The
longest cooking time is 99 minutes and 99
seconds.
Press number pad to select power level:
PRESS
APPROXIMATE
NUMERBER
PAD
PERCENTAGE
OF POWER
1,0
100%
（
PL10
）
9
90%
（
PL-9
）
8
80%
（
PL-8
）
7
70%
（
PL-7
）
6
60%
（
PL-6
）
5
50%
（
PL-5
）
4
40%
（
PL-4
）
3
30%
（
PL-3
）
2
20%
（
PL-2
）
1
10%
（
PL-1
）
0
0%
（
PL-0
）
1. In waiting mode, press COOK TIME
pad once.
2. Use the number pads to enter cooking
time.
3. Touch POWER LEVEL pad once,
and then use the number pad to
select cooking power level.
4. Touch START/ADD 30 SEC pad to
confirm.
Note:
You can check the power level
during cooking by pressing POWER
LEVEL and change the power level by
pressing number pad within this time.
