Mini Circular Saw
Owner’s Manual & Safety Instructions
Image
Description
Application
24 Teeth TCT Premium
Saw Blade
Cutting wood, plastic and
other soft materials
60
TCT
TEETH
CARBIDE
MAX:7000R
PM
60 Teeth HSS Saw Blade
Aluminum and other non-ferrous
thin sheet metal
Diamond Saw Blade
Tile, concrete or other similar
materials
9. Maintenance
Never use aggressive detergents or solvents for cleaning.
a.To prevent accidents, always unplug the saw from the power source before
cleaning or performing any maintenance the saw may be cleaned most effectively
using compressed air.
Always wear safety goggles when using compressed air. If
compressed air is not available, use a brush to remove dust and chips from the saw.
b.Motor ventilation vents and switch levers must be kept clean and free of foreign
matter. Do not attempt to clean by inserting pointed objects through open- ings.
c.Never use any caustic agents to clean plastic parts. Such as: gasoline, carbon
tetrachloride, chlorinated cleaning solvents, ammonia and household cleaners
containing ammonia. Do not use any of these to clean the saw.
d.Have an authorized service center examine and/or replace the worn carbon
brushes in the event of excessive parking.
e.Blades become dull even when cutting regular lumber, a sure sign of a dull
blade is the need to force the saw forward instead of guiding it while making a cut.
Take the blade to a service center for sharpening.
f.Keep the machine clean all the time.
g.If you discover any damage, consult the exploded drawing and parts list to
determine exactly which replacement part you need to order from our customer
service department.
h.Clean the housing only with a damp cloth. Do not use any solvents! Dry
thoroughly afterwards.
i.If the supply cord of this power tool is damaged, it must be replaced by a similar
cord available through the service organization or a qualified authoritative
technician.
: Do not use cleaning agents to clean the plastic parts of the
tool. A mild detergent on a damp cloth is recommended. Water must never
