Galaxy Audio ECD Any Spot ECDR, User Manual

2

1

Front Panel

Rear  Panel

System Setup

Receiver Programming

Channel Selection:

 Press the    "SELECT"  button to increase the    channel number by one 

(0-9, then A-F).* Press the    ASC button, and the Channel Display will begin to flash. Hold the 
transmitter’s (HH38 or MBP38) IR window towards and in close proximity less than 1.5 ft. to the 
ECD receiver’s    IR window. The ECD receiver’s    RF Signal LED will light once 
synchronization has been established. Only one IR connection can be established at a time 
during each syncing process.

*

Note:

 If the RF light on the receiver is on when the transmitter is off, change to another channel. 

Receiver volume control:

Rotate the audio output level control knob to the left to reduce the output level, rotate to the right 
to increase the output level.

6

2

7

5

4

 RF signal LED

 Infrared IR Window

 Channel select button

 Automatic Synchronization Control (ASC)

    button

4

5

6

7

2

Functions of the ECDR Receiver

Functions of the ECDR Receiver

 Audio Output Level Control

 Channel display

 AF Signal LED

1

2

3

AF

RF

MAX

MIN

AF

RF

MAX

MIN

SELECT

ASC

SELECT

ASC

1

1

2

2

3

3

4

4

5

6

6

7

7

 Power Adapter Jack.                     

 ¼" Audio Output (mixed).

1

2