Input Channels:
4
Various Output jacks are located on the right side of the MM. The mix
created with the 4 Input Volume Controls will appear at all Output
jacks. Stereo signals from Inputs 3 and 4 are presented in stereo at
the RCA and 1/8" Headphone Outputs. The Headphone Level
controls only the volume of the Headphone Output jack. This may
also be used as a master volume control if the Headphone Output
jack is patched to a line input on another device. Stereo signals from
Inputs 3 and 4 are summed to mono at the XLR and 1/4" Balanced
Mono Outputs. The “Mic/Line switch” located between the XLR and
1/4" Balanced Mono Outputs allows for selecting either
a “Mic Level” Balanced Mono Output or a “Line Level” Balanced
Mono Output.
Output Section:
Volume Controls, which correspond to channels 1 through 4, are
located on the top panel of the MM. Channels 1 and 2 also feature
Pad switches, located next to the Volume Controls, which will
reduce the gain (of the XLR inputs only) by –20dB to accommodate
very strong input signals. The Pads are engaged when the switches
are in the down position. Optimum performance is obtained when
the Volume Controls can be set generally in the middle of their
range rather than at the extreme MIN or MAX.
Volume Controls:
The Input Channel connectors are numbered 1 through 4 and
located on the left side of the unit. Inputs 1 and 2 are Balanced
Combination jacks that accept either XLR Mic or 1/4" line cables.
Phantom Power is supplied to the XLR connectors on Inputs 1
and 2 when the Power Switch is in the ON +24v PHAN position.
If Phantom Power is not required the MM should be operated with
the Power Switch in the ON position. Channel 3 features both
Stereo RCA and Stereo 1/8" jacks for convenience, however we
do not recommend using both types simultaneously. Channel 4
features Stereo RCA
jacks.
Input Channels, Volume Controls & Output Section
Summary of Contents for JIB/MM
Page 1: ...USER S MANUAL...
