Functions Continued
Functions Continued
Button
Function
LED ON/OFF
Press to turn on/off the LED button backlight.
PTY
DISP
Display: By pressing DISP, the current station will show the
Program Service or PS. If the station has no PS available, it will
show “NO PS”. Example, if Classic FM is tuned in, the display may
show CLASSIC or PS instead of the frequency.
BAND
Switch for AM or FM1 / FM2
MO/ST
Switch for mono or stereo.
AUX IN
Connect to external audio source (Media Player or Phone) via
3.5mm AUX Cable. (Volume level is controlled by source)
POWER
Power on and off.
VOLUME
Increase or decrease volume level.
AF
Alternative Frequency: If the current signal is weak, assuming an
alternative frequency is available for the station, press AF. RDS will
search a different frequency with stronger signal with same station.
TA
Traffic Announcement: Press TA, RDS will automatically search for
the traffic or travel stations. It will stop at the travel or traffic station.
1 thru 5
M
Memory
Direct selection of memories
+5
Memory Up
Add 5 to above for 6-10
Channel Down or Press and hold for about 2 seconds enters into
automatic scan searching.
Channel Up or Press and hold for about 2 seconds enters into
automatic scan searching.
Program Type: Radio stations can assign different program types to
their shows. These can be picked up by an RDS radio. Press PTY,
LCD shows the radio program type, such as news, sports or drama.
If the radio station does not assign the program type for the
program, LCD shows “NO PTY”.
M
TUNING
TUNING
5
Summary of Contents for RM-RDSTNR
Page 1: ...USER S MANUAL 482mm 19...
