background image

- 5 -

User Manual

• The cookware must be magnetic. Before switching on the appliance always place the magnetic cookware

centered onto the cooking field.

Special notes for your safety: 

• According to today’s standards of knowledge, persons with pacemakers are not at risk. In case of

misuse or unfavorable situation, we cannot eliminate remaining risks. For persons with pacemakers, we

recommend consulting a doctor before using any induction cooking plates. Persons with a pacemaker

should keep a minimum distance of 60 cm to the device while in operation.

• To avoid any risks, do not place very big magnetic objects (i.e. griddles) onto the cooking zone of the glass

field. Do not place other magnetic objects other than cookware (i.e. credit cards, TV, radio, cassettes) near

or on the glass surface of the induction cooking plate when it is in operation.

• Place the appliance on a stable, flat, and dry large surface to eliminate the risk of falling down. Do not place

the appliance on flammable surfaces (i.e. tablecloth). Do not place the appliance near or onto hot surfaces

or other strong heating devices (i.e. cookers, open fire, heater, etc.).

• It is recommended not to put metallic utensils (i.e. knives, pot or pan covers etc.) on the cooking plate in

case of switching on the appliance, they might get hot.

• Do not insert any objects (i.e. wires, or tools) into the ventilation slots.

Attention! This may cause electrical shock .

• Do not touch the hot surface of the glass field. Please note: Even though the induction cooking plate does

not heat up during cooking, the temperature of the heated cookware heats up the cooking plate.

The system of induction cooking

The induction cooking plate and the cookware placed on it build up one unit by reason of electro- magnetism. 

The emerging energy will change into heat directly in the bottom of the cookware.

This avoids heat loss which is caused by constant heating and permanent keeping warm on standard cooking 

plates. It is not necessary to preheat the induction cooking plate. When connected it is in “Standby Mode”, 

without any power consumption.

Eddy currents 

heat the bottom of 

the cooking pot

Alternating 

electromagnetic field

The bottom of the 

cookware is made 

of magnetic material

Control element

ca. 25KHz/60Hz

Functions & Advantages 

of Induction Cooking

Summary of Contents for 177GICS18











Reviews: