background image

- 5 -

User Manual

 Product

 Agitator and Speed  

 Maximum Bowl Capacity  

10 Qt. / 20 Qt.

 Bread and Roll Dough - 60 % AR  

 Dough Hook  -  1st only  

5 lb. / 20 lb.  

 Heavy Bread Dough - 55% AR  

 Dough Hook -  1st only  

3 lb. / 15 lb.  

 Pizza Dough, Thin - 40% AR

 Not Recommended  

-

 Pizza Dough, Medium - 50% AR  

 Not Recommended  

-

 Pizza Dough, Thick - 60% AR  

 Not Recommended 

-

 Raised Donut Dough - 65% AR  

 Dough Hook  - 1st and 2nd  

2 lb. / 8 lb.  

 Mashed Potatoes  

 Flat Beater  

5 lb. / 12.5 lb.

 Waffle or Hot Cake Batter  

 Flat Beater

4 Qt. / 8 Qt.

 Egg Whites  

 Wire Whisk 

1 Qt. / 1 Qt.

 Whipped Cream  

 Wire Whisk 

1 Qt. / 2 Qt.

 Cake Batter  

 Flat Beater

8 lb. / 20 lb.

When mixing dough ( pizza, bread, or bagels), check your "AR" absorption ratio - water weight divided by flour weight. 
Above capacities based on 12% flour moisture at 70°F water temperature. If high gluten flour is used, reduce above 
dough batch size by 10%.

Example: 

If recipe calls for 5 lb. of water and 10 lb. of flour, then 5 divided by 10 = 0.50 x 100 = 50% AR.

• 2nd Speed should never be used on mixtures with less than 50% AR.
• Do not use attachments on hub while mixing.

When calculating the correct size mixer for your application, here are some helpful weights and measures:

• 8.3 lb. = 1 gallon of water – 2.08 lb. = 1 Quart.

Mixer Capacity Chart

Summary of Contents for 177GMIX30













Reviews: