4
Assembly & Safety:
1. Place your new Galaxy VR-930 Booklet Maker on top of a sturdy
working table.
2. Plug the power cord into the back of the machine.
3. To reduce the risk of electric shock, do not operate the booklet maker
near water.
4. Do not use the booklet maker if the power cord is damaged.
5. Do not allow the electric cord to be in contact with hot surfaces.
6. In case of malfunction, return the unit back to your distributor for service.
This equipment does not contain any part that can be serviced by the
consumer or operator.
Operation Instructions
1. Keep fingers, hair, jewlery, neck tie and any loose clothing or objects away
from the mahcine, as they mmay be accidentally pulled inside.
2. As part of its safety features, the booklet maker is equipped with sensors in
various places of the machine. As a result, the machine will not work when the
cover is open, the paper is not in postion and no staple is inside the Stapler
Head.
3. Clean the machine by a soft and damp cloth only. Never use chemical or
alcohol base liquids as they may damage the rubber rollers or the surface of
the machine.
4. Lubricate the machine from time to time following the illustration below
(lubricant is included in the tools drawer).
5. Only use our standard staples as others may damage the booklet maker.
Electricity:
115VAC/ 60Hz
230VAC/ 50Hz
Tools & Accessories delivered with this machine:
1 Universal
Wrench (works
as a Stapler
Head screw
driver,
staples picker
and staples
remover.
1 bottle of
lubricant.
2 Staple
Pushers for
spare
replacement.
1 box of our
standard
staples, 26/6,
5000 pcs
per box.
