31
Modifying Water Care
Schedules
To modify the water care setting, touch the
pen icon at the right end of the desired mode.
Your spa’s default setting is the standard -
beginner mode, with two six-hour filtration
times, starting at 12 am and 12 pm.
Filter Cycles
To modify a filter cycle, touch the cycle you
wish to edit. You can change the date, start
time (set in 30-minute increments) and
filtration duration. These cycles will repeat
every week. Once you have made your
selection, press confirm. You can add an
additional filtration cycle (if your spa was used
more than usual on a certain day) by touching
the orange line labelled ‘add filter cycle’. To
delete a schedule, touch the garbage can icon
at the end of the desired line.
Economy
Add an economy cycle if there are specific days
each week that you do not want to use your spa
(away for work every Monday, ongoing weekly
commitment every Tuesday etc.)
To add an economy cycle, touch the economy
tab and press ‘add economy’. To delete the
schedule, touch the garbage can icon at the
end of the desired line.
Diverters
Although you will use the touchpad to turn the jets on and off, diverters allow you to customise
the massage pressure from seat to seat, diverting water between the spa jets. The diverter
controls are located on the edges of your spa and look like this:
INCREASE
DECREASE
