- 3 -
User Manual
Auto Off Time Setting
When the scale is at “0”, press and hold TARE key till the scale displays “5”, press MODE key to
toggling from “1”, “3”, “5” , “-” (auto off in 1 minutes, 3 minutes or 5 minutes) and “-” (no auto off),
press TARE key to confirm.
When using AC adapter, the auto-off function will not work.
Counting
When the scale is in normal weighing mode, press and hold PCS key to enter into counting mode.
Now the scale displays “25” (means the samples quantity), put the known-quantity samples on the
scale platter, press MODE key to toggling from “25”, “50”, “70” and “100”, then press TARE key to
confirm. Put more same object on the platter, the scale will display the total quantity of
the weighed objects.
If any wrong operation happens, the scale will display “Err” and back to normal weighing mode.
In Counting mode, press MODE key to back to normal weighing mode.
Overload Indicator
When the scale is overloaded , the following will appear on the screen. “O_Ld”
Low Battery Indicator
When the battery voltage is less than 2.5V, the scale will display “Lo” and power off.
