- 8 -
FREQUENCY CHART
Channel Channel Frequency
Channel
Channel Frequency
1
26.965 MHz
21
27.215 MHz
2
26.975 MHz
22
27.225 MHz
3
26.985 MHz
23
27.255 MHz
4
27.005 MHz
24
27.235 MHz
5
27.015 MHz
25
27.245 MHz
6
27.025 MHz
26
27.265 MHz
7
27.035 MHz
27
27.275 MHz
8
27.055 MHz
28
27.285 MHz
9
27.065 MHz
29
27.295 MHz
10
27.075 MHz
30
27.305 MHz
11
27.085 MHz
31
27.315 MHz
12
27.105 MHz
32
27.325 MHz
13
27.115 MHz
33
27.335 MHz
14
27.125 MHz
34
27.345 MHz
15
27.135 MHz
35
27.355 MHz
16
27.155 MHz
36
27.365 MHz
17
27.165 MHz
37
27.375 MHz
18
27.175 MHz
38
27.385 MHz
19
27.185 MHz
39
27.395 MHz
20
27.205 MHz
40
27.405 MHz
- 9 -
PROCEDURE TO RECEIVE AND TRANSMIT
A. MICROPHONE
The push-to-talk switch on the microphone controls the receiver and transmitter.
Press the switch and the transmitter is activated, release switch to receive. When
transmitting, hold the microphone two inches from your mouth and speak clearly in a
normal voice. This transceiver comes complete with a low impedance dynamic
microphone.
B. PROCEDURE TO RECEIVE
1. Be sure that power source, microphone and antenna are connected to the proper
connectors before going to the next step.
2. Turn
VOL
knob clockwise to apply power to the radio.
3. Set
the
VOL
for a comfortable listening level.
4. Set
the
MODE
switch to the desired mode.
5. Listen to the background noise from the speaker. Turn the
SQ
knob slowly
clockwise until the noise just disappears. The
SQ
is now properly adjusted. The
receiver will remain quiet until a signal is actually received. Do not advance the
control too far or some of the weaker signals will not be heard.
6. Set
the
CHANNEL
selector switch to the desired channel.
C. PROCEDURE TO TRANSMIT
1. Select the desired channel of operation.
2. Set
the
MIC GAIN
control fully clockwise.
3. If the channel is clear, depress the push-to-talk switch on the microphone and
speak in a normal voice.
Summary of Contents for DX 919
Page 9: ...MEMO MEMO...
Page 10: ...MEMO MEMO...
