Page 1 Galaxy Floor Sanding Machines, Operator’s Manual
OPERATOR SAFETY INSTRUCTIONS
You MUST read and understand all the INSTRUCTIONS, WARNINGS and CAUTIONS in this
manual PRIOR to operating this machine. Failure to do so can result in INJURY and/or DEATH. It
can also lead to damage to the machine and/or to other things.
Warning:
This sign means: Injury and/or death could occur if you do not follow these
instructions.
Caution:
This sign means: Damage to the machine and/or to things in the environment could
occur if you do not follow these instructions.
Warning:
You must READ this manual before using this machine.
Warning:
This machine can cause flammable materials and vapors to IGNITE. Do NOT use
this machine near any SOURCE OF IGNITION such as lighters or matches, flames or pilot
lights and burning substances such as cigarettes, etc.
Warning:
Do not use this machine near highly FLAMMABLE materials such as solvents,
thinners, gasoline, etc. Always work in a well-ventilated area.
Warning:
This machine sands floors and it creates ignitable dust that can lead to FIRE and
EXPLOSIONS. Always avoid sources of ignition such as flames, cigarettes etc. Work in well-
ventilated conditions to control the volume of dust in the air. Always safely dispose of dust.
•
Always remove the contents of the bag when it is 1/3 full. Dispose of it outside in a containable
garbage disposer.
•
Never leave any dust in the bag after using the machine.
•
Never put the dust into an open fire.
•
If the floor-sanding machine’s disc hits metal it can cause a spark and/or damage to the
machine. Always use a hammer and punch to sink all floorboard nails.
Warning:
Always turn the power switch “OFF” prior to plugging or unplugging the machine
to/from an electrical power source. Never plug a partially assembled machine into an electrical
power source.
Warning:
This machine is manufactured solely for sanding. Never use it for any other
purpose.
