Galaxy GHDXS2-1430R-16F4D Installation and Hardware Reference Manual
3-6
3.3 DIP
Switch
Figure 3-2: Rear Panel DIP Switches
DIP switches can be used to determine the following parameters:
1.
Onboard hub:
The onboard hub combines the same channels on
different RAID controllers into the same host loops. The configuration
is diagrammed below:
Figure 3-3: Host Ports Hubbed Together
NOTE:
Currently the Fibre host ports can operate either at a fixed 4Gb/s or a fixed
2Gb/s speed. Make sure all Fibre Channel network devices, HBAs or
switches, operate at the specified speed.