Galaxy GHDXS2-1430R-16F4D Installation and Hardware Reference Manual
3-8
3.
CH0/CH1 Link Speed
:
Shown below are the combinations of DIP switch mode settings:
DIP Switch Mode Setting
Switches
#1 to #3
Enclosure ID: defaulted to represent number “0,” SW ID:
0, 0, 0; No need to change.
Switch# 4
0: Hub Enabled; 1: Hub Disabled
Switch ID combinations
5 6
Switches
0 0
0 1
1 0
CH0/CH1 at 4G speed
Switches
#5 and #6
1
1
CH0/CH1 at 2G speed
Table 3- 1 DIP Switch Mode Settings
3.4 Sample
Topologies
Use the Fibre ports, marked as “
CH0
” and “
CH1
”, on the controller
modules to connect to host computer(s) or to a switched fabric.
3.4.1 Multiple RAID, Fault-tolerant Connection
Shown below is a DAS configuration using cross-links among up to 3 RAID
subsystems.