Galaxy GHDXS2-1430R-16F4D Installation and Hardware Reference Manual
5-4
Replacing
Controller Module Components
Step 1.
Prepare a clean, static-free work pad or container
to place
the removed controller.
Step 2.
Disconnect all cables
from the controller module. These may
include the Ethernet cable, Fibre Channel host links, and serial
cables connected to the COM ports.
Step 3. Remove the screws
underneath the ejection levers. (See
Figure 5-1
)
Figure 5-1: Removing the Controller Retention Screws
Step 4.
Remove the controller module
by pressing down the two (2)
levers. The controller module will automatically ease out of
the controller module bay. (See
Figure 5-2
)
Figure 5-2: Removing Controller
Step 5.
Gently pull the controller module out of the subsystem. Place
the controller module on a clean, static-free surface.