Galaxy GS-202, Operation Manual

6

Operation Instructions                                                         

Connecting the System 

1.  CONNECT THE POWER CORD 

1.1 Connect the power cord into a properly grounded electrical outlet with a sufficient 

amperage rating. 



VOLTAGE 

120 Volt – The GS-202 and GS-203 requires a full 10 amp grounded circuit for 

120 volt operation. 

240 Volt –The GS-202 and GS-203 requires a full 5 amp grounded circuit for 240 

volt operation. 



EXTENSION CORDS 

If used, should be as short as possible and not less than 

12 gauge.Heavy duty cords are recommended. 



CIRCUITS 

that have less than 10 amps or that have other high demand 

equipment or appliances(especially more than one heat seal machine) plugged in, 

should not be used. 

NOTE: 

If the supply cord is damaged, it must be replaced by the manufacturer, its 

service agent or a similarly qualified person in order to avoid hazard.   

CAUTION 

Failure to follow these instructions will cause: 

1)  Erratic controller functions. 2) Inaccurate displays and slow heat-up. 3)

The circuit 

breaker to disengage. 

Turn On the System 

2. Switch 

The 

System 

On