26
26
Step Six:
•
Once your spa temperature reaches 30
degrees, add the recommended chemicals
to the water using instructions found in
the
(if using) or
follow the instructions for your choice of
water care product.
Step Seven:
•
Allow pumps to run for a few minutes with
the cover off so the chemicals can mix.
Step Eight:
•
4-6 hours after you have added your
chemicals, test your water - use the
testing strips supplied in the kit to analyse
your water.
•
You may need to adjust your chemicals
depending on the results.
Step Nine:
•
Set the spa pool to 38 degrees celsius
(or your desired temperature).
Step Ten:
•
Make sure your cover is down and tightly
secured and allow the spa pool to heat
(6+ hours).