9
2.8 Example: Programming a Weekly Irrigation Schedule
Let’s assume you want to program the irrigation controller to water three times a
day using the 24 hour time display format: at 08:00 AM, 13:00 PM and 19:00 PM,
for 21/2 hours at a time, on Tuesday and Friday.
To switch to an AM/PM time display format, see section 2.2.
1. Press
until appears.
2. Press
. A blinking arrow appears at the bottom of the display.
3. Press
or
to move the arrow to the number of valve to be programmed.
4. Press
until
appears.
5. Press
. The hour digits blink. Press
or
until the hour displays 2. Press
The minute digits blink. Press
or
until the minute displays 30.
6. Press
. v appears.
7. Press
. A blinking appears at the top of thedisplay, under Monday. Press
until the blinking arrow appears under Tuesday, and then press
.
The
arrow under Tuesday will stop blinking and advance one position to the right,
to
Wednesday.
Press twice to move the arrow to Friday, and then press
.
8. Press
.START I time appears. Press
. The hour digits blink.
9. Set the start time to 08:00 by pressing
or
.
Repeat this step to set START II time [2] to 13:00 and START III time [ 3] to
19:00.
10. Press . START IV time [4] appears. Press
. The hour digits blink.
11. Press
or
until
OFF
appears. The fourth opening of the valve is
canceled.
Summary of Contents for DC-11SF
Page 22: ...22 0 2 0 0 0 0 0 0 0 4 2 0 5 5 1 2 3 4 5 6...
Page 23: ...23 0 4 4 4 7 8 9 10 11 12 13...
Page 24: ...GDB162...
