3
Assembly
Step
Part
Box #
Inner Box
Motor Drive
Battery
3
n/a
Motor Drive
Belts
3
Small, flat box
Armboard
Armboard Assembly **
Front pillar **
3
8” x 5” x 4”
Tools, etc.
Cotton gloves
Platter removal - nylon strap
Hex wrench (for ground wire)
5/16" Hex Wrench (armboard)
Tracking force scale
Strobe Disk **
Cartridge Protractor **
Microfiber cleaning cloth
3
n/a
Arm Mounting Hardware
The following parts are packed in an 8” x 5” x 4” box:
Gavia and Serac Armboard:
7/8” tall armboard
3/8" (1.75” long) stainless steel socket head pivot/fixing bolt and washer
1/2” tall cylindrical pillar
Stelvio Armboard:
1.400” tall armboard with integral damping cylinder
3/8" (1.75” long) stainless steel socket head pivot/fixing bolt and washer
Thin, stainless steel washer (2” diameter)
Front Pillar (all single tonearm turntables):
Front cylindrical pillar (1.5” tall)
3/8" (1.75” long) stainless steel socket head fixing bolt
Strobe Disk:
We are currently negotiating with a supplier for a speed strobe and strobe disk. This
will become available in the latter part of 2006.
Cartridge Protractors:
These are supplied with some tonearms we sell. Currently, Schröder and Triplanar
Tonearms are delivered with protractors.
