ADP 4000 Quick Reference Card
Loading Stock
The Unit is equipped with two external stock inputs.
1. Verify the power switch is in the I (ON) position and the
unit has completed initialization.
2. Position the ticket stock box(es) behind the printer in line
with the ticket inputs for Bin A and Bin B. Refer to figure
for orientation.
3. Insert the ticket stock into Bin A face down, staple stub
first. As the stock enters the bin, the motor will begin to
run. Release the stock when the bin motor begins to
pull the stock into the Unit. The stock will be
automatically positioned for use. Repeat the above
procedure for Bin B. Check the LCD display; if the unit
is Offline, place it Online by pressing the
ONLINE/ENTER
push-button.
If you purchased the optional Locked Ticket Box, attach
the bin to the rear of the ADP 4000 printer using the two
thumbscrews already installed in the bin. The Locked
Ticket Box can be set up in two different configurations.
•
First, with the shelf installed in its normal position,
the bins can be loaded with two stacks of 500
coupons each, both of which are secured when the
door is closed and locked.
•
Second, with the shelf removed (it can be stored
upside down on the bottom of the box with the lip up
and to the rear). In this configuration, there is room
for a box of one-thousand for Bin A internally
secured. A second, non-secured stock type can be
inserted from the top of the bin by sliding the latch
forward (toward the Unit) and opening the flap.
Refer to the figure above for routing of the stock for
this configuration.
See the next page for additional information.
ADP 4000 Printer
Quick Reference Guide (January 2007)
Galileo by Travelport obtained written permission from Unimark to reproduce contents of the Sprite Quick Reference Card 71U-1405-500; REV B, © 2006 Unimark Products, LLC. for
the ADP 4000 Quick Reference Card. No part of this publication may be reproduced or transmitted without prior written permission of Galileo by Travelport, or Unimark, Inc.
2
