GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 37
GPRS. Not activate.
GPRS initialization failed.
GPRS is not activated on this SIM
card. Not enough money on the
account. GSM network is
overloaded.
GPRS. Success connect
to server.
Device server connection is successful.
GPRS. Not success
connect to server.
Device server connection failed.
The Server access is denied or
wrong server settings for the
device.
GPRS. Reconnect
Number=№
Number of server reconnections.
№ - reconnection number.
GPRS. Firstpack OK.
First packet has been sent to the server.
GPRS. Firstpack
False.[0]
The device has sent the first packet, but
there is no confirmation at TCP/IP level.
GSM network is overloaded. The
packet has been blocked by device
brandmauer or FireWall.
GPRS. Firstpack
False.[1]
The device has sent the first packet, but
there is no confirmation at the
application level.
GSM network is overloaded. The
server is not handling the first
packet.
SMS debug info
Troubleshooting message
Description
SMS. RX SMS.
A new SMS message is received
SMS. TelNum: +79112299922
received from a given phone number
Command: ID
ID command is received
SMS. TX OK.
Message is successfully sent
SMS delfromslot 1
handled SMS deleting ( from the first SIM card slot)
Not reply SIM. Slot 1
no SIM card reply (from the first SIM card slot)
GSM. No SIM-card
no SIM card reply (the card is probably not inserted)
Internal Flash memory debug info (track memory)
Troubleshooting message
Description
MEM. Inp-s
Point record reason is the change of inputs state;
MEM. Turn,dist
Point record reason is the change of distance between previous and new
place or angle of driving direction;
MEM. Time
Record reason is time;
MEM. Write point – 200
Point with sequence number 200 is recorded.
GPS unit debug info
Troubleshooting message
Description
Possible causes
SAT. Coord refresh.
Coordinates for current record have been
updated by GPS unit. The vehicle is considered
to be moving, packet has not been filtered off.
SAT. Coord not refresh.
Coordinates for current record have not been
updated.
Filtering at stops is activated.
SAT. Temper is low than -40
Device temperature is lower than -40ºC.
Operation at lower temperatures is impossible.
SAT. Temper is high than 65
Device temperature is higher than +65ºC.
Operation at higher temperatures is impossible.
SAT. Time out. Restart MCU.
No GPS data for 60 seconds. Device reset.
GPS unit is out of
order. GPS unit failure.
GLONASS. Message received.
Len = 401
Terminal received information from GLONASS
unit. 401 byte is received.
GPS. Message received. Len =
172
Terminal received information from GPS unit.
172 byte is received.
GPS. Change baud rate = 1
Attempt to set GPS unit rate. Attempt № 1.
