GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 51
9.7
Routes for Autoinformer
This tab contains a graphical Autoinformer zones editor (section
Autoinformer function
).
The Internet access is required to display the map.
To edit the zones:
1)
Insert a micro-SD card into the computer, choose the disk in the drop-down list. The route list and
the track list will be loaded automatically.
2)
Choose an edited route in the drop-down list or create a new one by clicking “+” on the right side of
the route list. All stops will be loaded automatically, the map will move to the first stop.
3)
Edit parameters of the zones. It can be done on the right panel as well as visually by moving red
points with a mouse.
4)
Create new zones. Click “+” on the right side of the stops list. A new zone will appear in the middle
of the map, and then it can be edited.
5)
Choose an audio file for the zone. It can be done in the Audio file drop-down list or you can load a
new file by clicking “+” on the right side of the stops list. The following formats are supported:
wav,mp3, flac, ogg, raw, gsm. The Configurator will automatically convert the file in appropriate
format for the Terminal and copy it to the micro-SD card.
6)
Press Save route to save changes to the micro-SD card.
To make sure all zones are correct, download the track developed after a trip. The Configurator supports
the tracks uploaded from the internal memory of the Terminal or stored on the micro-SD card in the format
csv.
