11
Gallagher W-0 Weigh Scale
User Guide
English
Zero Tracking
During a weigh session, small amounts of debris such as mud or dung can
accumulate on the weighing platform. After each animal leaves the platform, the
scale compensates for the small amount of debris left by automatically zeroing the
weight.
If the accumulated weight of the debris is more than the scales zero tracking range,
zero tracking will not work and the
Zero
icon will flash. To restore zero, press the
>0<
Zero
button.
Note:
Zero tracking is enabled for Auto and Manual modes but disabled in Fine
mode.
CARE AND MAINTENANCE
The W-0 is a tough and reliable product designed for use in typical livestock
environments. Proper care and maintenance can extend its life.
Listed below are guidelines for keeping the W-0 in good condition.
•
Do not expose the W-0 to excessive temperatures or fire. (Below -20
o
C or
above +70
o
C).
•
Do not submerge the W-0 in any liquid.
•
Store in a cool, dry place. Avoid storing in direct sunlight.
•
After use, clean with a damp cloth. Take care not to scratch the display.
•
If storing the W-0 for a long time, store with the battery fully charged.
•
If battery fluid comes in contact with:
Eyes
- flush the affected area with water for at least 15 minutes. Ensure
adequate flushing by separating the eyelids with fingers. Call a physician.
Skin
- immediately flush with water and/or soap.
•
This Weigh Scale contains a Lithium battery which is not user replaceable. The
lithium battery must be replaced by a trained professional using a Gallagher
approved battery. Return the unit to a Gallagher Authorised Service Centre for
battery replacement.
Software Updates
It is important to update the W-0 software from time to time to ensure you
have the latest enhancements.
Updates are regularly released to enhance the features of the scale or to correct
issues.
1.
From the Weighing screen, tap
Settings
(top right of screen).
2.
Select
Upgrade
under W-0.
3.
Follow the instructions on the screen to complete the upgrade.
