NTS-4000-R
www.
galsys
.co.uk
galleonsupport
.com
TEL:
+44 (0) 121 608 4433
FAX:
+44 (0) 121 608 4477
Time Server Configuration Options
To set the Time Server options for the NTS-4000-R, select the device as before, then click ‘Options’.
The current status is shown along with the options to send broadcasts and/or syslog messages.
Broadcasts are a way of sending a single timestamp to many computers at the same time.
Multicasts are similar but may span more than one subnet if the network is set to do so. If the
value of the broadcast frequency is set to 0, none are sent.
Other subnets may be sent broadcasts (called direct broadcasts). E.g. one could send a broadcast
to subnet 192.168.10.xxx using a broadcast address of 192.168.10.255
The syslog server is where system status messages are sent using the syslog protocol. If this is set
to 0.0.0.0 no syslog messages are ever sent.
Upgrade Firmware
The ‘Upgrade’ option allows the NTS-4000-R Software to be upgraded to add new features and/or
fix problems. Select the device to be upgraded and click ‘Upgrade’. Select the firmware file and
click ‘Open’. After approximately 1 minute, the NTS-4000-R will have completed the upgrade and
restart automatically.
Check
galleonsupport
.com for any updates to the NTS-4000-R Software.