13
TEL:
+44 (0) 121 608 4433
FAX:
+44 (0) 121 608 4477
www.
galsys
.co.uk
galleonsupport
.com
SIGNALCLOCK V2 Manual
DAYLIGHT SAVING TIME
By default, the clock will not have daylight saving time (DST) enabled. You will need to enter the
DST settings for your time zone manually.
To enable DST, select
‘Enable DST’
and enter the settings required.
These settings determine when DST starts and ends. When DST starts, the clock will go forward
one hour and return to normal time once DST ends.
Note: The DST end time does not take daylight saving into account. For example, setting 1.00
AM
here means the time would revert at 2.00
AM
with daylight saving.
Example Configuration:
In the UK, DST begins on the last Sunday in March at 2.00
AM
and ends on the last Sunday of
October at 2.00
AM
. Therefore, the settings would be:
Start: 3 (March), 5 (5
th
Sunday), 0 (Sunday), 2, 0
End: 10 (October), 5 (5
th
Sunday), 0 (Sunday), 1, 0
