EN - 24
Use:
•
Place the heating waist belt on the waist. Take care it is not folded/crumpled. Fix the
heating waist belt using flexible strap with Velcro fastener. Waist circumference can be
adjusted from 50 to 100 cm.
•
Connect the appliance to mains.
•
Switch on the heating waist belt by pressing
B2
.
•
Press button
B3
to set the required temperature level.
•
The heating waist belt can be switched off by long pressing button
B2
.
Remark:
•
The heating waist belt features automatic switching off function (activated after approx.
90 minutes of operation).
IV. MAINTENANCE
Disconnect controller
B
from the heating waist belt
A
. Wipe the controller
B
with a damp cloth.
The heating waist belt
A
is machine washable. However we recommend hand-washing to
prolong the appliance service life. Never use any aggressive cleaning agents and industrial
solvents for cleaning. After washing, hang it freely on a clothesline (no pegs) and allow it to dry.
Machine washing of the heating waist belt
Before washing, be sure the heating waist belt has not been damaged and is in good
condition.
1) Disconnect the connector from the heating waist belt. Be sure the controller and power
cable have been removed.
2) Put the heating waist belt into the washing machine as if washing clothes.
3) After 10-15 minutes, switch off the washing machine and allow the heating waist belt to dry.
4) Before connecting the connector with remote control box, be sure the appliance is dry.
Notes:
-
Make sure the washing machine is clean.
-
The temperature of the water in the washing machine should be in the range of 25 °C
- 40 °C. Increased water temperature can result in damage of the heating waist belt.
Recommended temterature is 30 °C.
-
Wash separate from all sharp objects that could damage the appliance.
-
Don´t use the heating waist belt if wet or damp.
V. TROUBLESHOOTING
Error messages:
Shown on display
Problem
Solution
„P“
Connector of the control unit is not
correctly connected to the appliance
Check the connector
connection
„E“
Internal circuit of the appliance is
defective
Contact the authorised
service centre
„C“
Appliance is overheated
Disconnect the appliance
from electric mains and
allow it to cool down