Gallet GALMIX 232, Instruction Manual

GB

25

/ 35

24

D – rotary bowl

 (only for type GALMIX 432)

E – whisks 

F – kneading hooks

g – immersion blender 

(only for type GALMIX 332 and GALMIX 432)

H – spatula 

(only for type GALMIX 432)

III. PrEPArATION FOr UsE

Remove all packing material and take out the hand mixer and the accessories. Remove all possible 

adhesion foils, stick-on labels or paper from the appliance. Before the first use, wash the parts that 

will be in contact with food in hot water with a detergent, rinse thoroughly with clean water and wipe 

till dry, or let dry (see 

V. MAINTENANcE

). Put the hand mixer with the selected accessories on a 

flat, stable, smooth and clean work surface at the height of at least 85 cm, out of reach of children 

and incapacitated people (see par. 

I. sAFETY WArNINg

). Make sure that the power cord is not 

damaged and that it does not lead through any sharp or hot surfaces. Plug power supply fork 

A5

 to 

the electric power. Choose the amount of the processed food so that the maximum volume of the 

containers marked with the gauge line is not exceeded. Possible short-time mild smoke when the 

appliance is operated for the first time is not a defect and the appliance is not subject to a complaint 

for this reason.

Use of the individual levels (A1, A2)

0

  – off

1 to 5

 – speed selection (use for whisking, mixing, kneading and mixing)

MAX button – the motor is running at max. power the whole time the button 

A2

 is pressed

– may be use at any speed level except 

0.

stand (b) – for 

GALMIX 432

Folding out the bracket – press the 

b2

 button and fold out the bracket 

b1

. To fold the bracket back 

press the 

b2

 button again. The bracket will fold back and fasten (audible click will sound).

rotary bowl (D) – for 

GALMIX 432

Inserting the bowl into a stand – fold out the 

b1

 bracket and place the bowl into the stand 

b

 so that 

the protrusions on the bowl fit into the protrusions on the stand along the whole rim.Proceed reversely 

when removing the container.

Inserting and removing the lid (c) – for 

GALMIX 432

Insert the lid in the bracket 

b1

 so that the protrusions on the lid fit in the grooves in the bracket. Push 

the lid then all the way. Proceed reversely when removing the container. 

Feeding opening cover (c1) – for 

GALMIX 432

Sliding the cover aside, the feeding opening can be used to add liquid or solid ingredients in the bowl 

D

 when the propulsion unit 

A

 is running.

IV. UsE OF THE AccEssOrY

(pic. 2, 3, 4, 5)

Consider the following tips for processing examples and inspiration whose purpose is not to provide 

instructions but to show the various options of food processing. Preparation (processing) times of 

ingredients range within minutes. Select the amount of processed ingredients so that the maximum 

of the rotary bowl 

D

 (3 l) for liquids is not exceeded. Bigger amounts of ingredients must be divided in 

several portions and the content of the utensils must be checked regularly. We recommend stopping 

the working, turning off the appliance (position 

0

) and remove all ingredients which have stuck on the 

accessories 

E, F, g

 or the walls of the utensils and lid (see 

I. sAFETY PrEcAUTIONs

). Turn off the 

mixer 

A

 and unplug the fork of the supply cord 

A6

 from the el. outlet after finishing work. Bowl 

D

 is 

suitable for use in a microwave oven.