EN
EN - 31
– Do not fill the container with water or other liquid to maximum. When in operation, the
water could overflow and get into the appliance.
–
Make sure that your hair, clothes and accessories do not get into dangerous
vicinity to the rotating parts!
–
The power cord must not be damaged with sharp or hot objects, open fire, it must not
be sunk into water or bent over sharp edges. Never put it on hot surfaces or do not let
it hang over the edge of a table or work tables. Hitting, stumbling or pulling the power
cord e.g. by children can result in tilting over or drawing the appliance down and serious
injury!
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
– Check the condition of the power cord of the appliance regularly.
– Make sure that the power supply cable does not get in between the rotating parts of the
appliance.
– In order to ensure safety and proper function of the appliance, use only original spare
parts and accessories approved by the manufacturer.
– Use this appliance only for the purpose for which it was designed as specified in this
user‘s manual. Never use the appliance for any other purpose.
–
CAUTION
: Do not use the appliance with a program, time switch or any other part
that turns the appliance on automatically as there is a risk of fire if the appliance is not
covered or placed properly.
–
WARNING
: There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
–
All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this language mutation.
– The producer does not undertake any responsibility for damage or injuries caused by
improper use of the appliance and the accessories (e.g.
food deterioration, injuries,
cuts
) and its guarantee does not cover the appliance in the case of failure to comply with
the safety warnings above.
II. DESCRIPTION OF THE CONTROLS
A - Propulsion unit
A1 - Control button with a safety
A2 - Propulsion shaft
A3 - Supply cord
B - Measuring bowl
B1 - Rotation ejector
B2 - Double-sided grading/chopping disc
B3 - Lid with a feeding opening and an ejection opening
B4 - Pusherr
B5 - Blade
B6 - Cover