17
EN
Styling
6. Plug the hair-styling nozzle or the angled nozzle onto the air outlet opening.
7. Switch the device to a low blower setting and a high temperature setting.
8. Shape each strand individually, e.g. using a round brush, and blow-dry it as you do
so.
9. Once you have shaped a strand to the style you want, press the
COOL
button and
fi
x
the strand in place with cold air.
After Use
CAUTION!
■
Danger of electric shock!
Remove the mains plug from the plug socket before doing
any cleaning. Keep the device, the mains cable and the mains plug away from water
or other liquids.
■
Caution - risk of burns!
The device is still hot after it has been switched off.
■
Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the
device. These could damage the surfaces.
1. Switch the device off and pull the mains plug out of the socket.
2. Allow the device to cool down.
3. Remove hair,
fl
uff or dust from the air outlet opening.
4. If necessary, wipe down the housing with a slightly damp cloth and dry it with a soft
cloth. If it is heavily soiled, you can use a little detergent to clean the housing.
5. If necessary, the nozzles, Handel and base can be cleaned under running water with
a little detergent.
Dry all attachments thoroughly before you attach them to the
device!
6. Keep the device out of the reach of children and animals in a dry, frost-free place that
is protected from the sun.
Do not wind the cable around the device!
