© Copyright
Gallo Technologies
. All Right Reserved
- 5 -
Rev. V8.2- 20212
Turning ACC, IGN1, IGN2 ON/OFF and Starting the Engine:
When in Disarm mode and the RFID key FOB is in detection range.
To Turn ACC ON/OFF
Press
“PUSH START STOP”
button once then release, ACC will turn ON; press
“PUSH START STOP”
button once again then release, ACC will turn OFF.
To Turn ACC, IGN 1and IGN 2 ON/OFF with no engine start.
Press
“PUSH START STOP”
button and hold for 1.5 sec. without pressing the brake/clutch peddle, ACC,
IGN 1 and IGN2 will turn ON and the engine will not start. To turn ACC, IGN1 and IGN2 OFF, press
and hold for 1.5 sec. “
PUSH START STOP”
button, or when the RFID key FOB is taken out of range,
ACC, IGN1 and IGN2 will turn OFF automatically
.
OFF
ACC, Ign1
& IGN2
ON
Press button for 1.5 Sec
No brake or clutch
Press button for 1.5 Sec
OFF
ACC
ON
Press button once
then release it
Press button once
then release.
1.3 “PUSH START STOP” BUTTON OPERATION
