Galmet SGW(S) Maxi 1000 Installation And Operating Manual Download

Page: 17 / 20

Installation and Operating Manual / Warranty Card - SGW(S): Maxi / Maxi Plus / M

8. Guarantee terms and conditions

19.4. mechanical damages or damages resulting from atmospheric conditions (e.g. frost) and exceeding of the acceptable working pressure, indicated on

the name plate,

19.5.  malfunctions resulting from application of fittings inconsistent with the binding norms,
19.6.  breakdowns caused by assembly of exploitation of inoperative or damaged safety valves,
19.7.  damages being the result of incorrect use,
19.8.  damages being the result of not following the principles contained in the operating manual,
19.9.  cases of any differences in temperature of the domestic hot water between the faucet and indication on the thermometer in the tank up to 12°C

(among other things it may be affected by thermostat hysteresis, the distance between the tank and the delivery point, low temperature in the room,
in which the heater is assembled),

19.10. cases related to natural formation of limescale,
19.11. damages arose as a result of fire, flood, lightning stroke, overvoltage in electrical installations w or any fortuitous events,
19.12. breakdowns resulting from use of non-original spare parts outside the offer of Galmet, such as heater, magnesium anode, titanium anode,

thermostat, thermometer, gaskets etc.,

19.13. occurrence of electrochemical corrosion (e.g. due to lack of dielectric joints in mixed systems),
19.14. damages being the result of non-replacement of magnesium anodes within the deadlines specified in the guarantee card,
19.15. necessity of periodical cleaning of the tank from the accumulated deposits,
19.16. replacement of magnesium anode,
19.17. replacement of consumable fluids (other than water), assembly and disassembly of equipment covered by the hereby guarantee.

20. The method for repair shall be specified by the manufacturer.
21. Multiple repairs will not include the following: heater adjustment, replacement of magnesium anode, replacement of gaskets, nor any element wearing

during normal operation of the equipment.

22. The manufacturer shall exclude their liability by virtue of any surety for physical damages of the equipment. The buyer shall be entitled to a guarantee based

on principles, within period and mode specified in the hereby guarantee document, subject to par. 24 and 25.

23. The guarantee for the consumable goods shall not exclude, limit, or suspend any rights of the buyer, resulting from nonconformity of the goods with the

contract.

24. The hereby guarantee terms and conditions shall be the only ones granted by the manufacturer. Any other terms and conditions shall not be accepted, unless

they shall be granted by the manufacturer in writing.

25. To all matters not settled in the hereby terms and conditions provisions of the Civil Code shall apply.

On condition of replacement of magnesium anode at least once every 18 months. The replacement shall not be included in the guarantee services (purchase

receipts for the anodes should be kept, as well as any records in the guarantee card about their replacement).

In case of application of titanium anode in the tank (permanently connected to the electricity network) payable inspections should be mandatorily conducted,

checking correct function of the equipment. Such inspections may be ordered only to authorised assemblers or manufacturer. The first inspection should be
carried out after 12 months from the date of activation of the equipment, and the subsequent ones every 24 months. All the inspections have to be recorded in
the guarantee card and the receipt for the performed services should be kept.

NOTICE – during all the period of use of the equipment confirmation of its purchase should be kept (receipt of invoice) as well as the guarantee
card – correctly filled, complete, stamped by the store and assembler and not containing any adjustments.