background image

                                                 

                              

 

    5

 

.

Visual drawings 

  
    
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
 
     6. Troubleshooting 

 

 

 

 

7

 

Visual scheme

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
8.Guarantee terms 

 
1.  Replace  the  magnesium  anode  at  least  every  12  months  (please  keep  the  purchase 
receipt 
of the anode) Regular replacement of the magnesium anode is the condition to maintain 
the guarantee for the container. 
2. 

The  safety  valve  has  to  be  installed  directly  before  the  heater  on  the  cold  water  feed 

pipe. 

 

3.  Free  repairs  of  damages  attributable  to  the  manufacturer  will  be  remedies  within  14 
working days from the date of submission. DO NOT DISASSEMBLE THE HEATER. Keep 
the  purchase  receipt  of  the  heater  for  review  by  the  service.  Multiple  repairs  do  not 
include: replacement of the magnesium anode, replacement of the seal etc. 
4. The basis of guarantee repairs is a purchase invoice and the guarantee certificate that 
is 
complete,  filled  in  correctly,  stamped  by  the  relevant  store  and  fitter,  and  contains  no 
adjustments. Keep the guarantee certificate throughout the whole guarantee period. 
5. In any cases not regulated herein, relevant regulations of the Civil Code shall apply. 
6. Any mechanical damages of the heater void the guarantee. 
7. Assemble the heater in such a way to ensure free access (e.g. for maintenance, repairs 
or 
replacement).  The  manufacturer  is  not  responsible  for  any  possible  inconvenience  or 
costs 
resulting from casing disassembly. 
8.  The  guarantee  for  the  sold  consumer  product  does  not  exclude,  limit  or  suspend  any 
rights 
of the buyer resulting from inconsistency of the product with the agreement. 
 

Guarantee for storage tank - 24 months. 

UNAUTHORISED REPAIRS OR MODIFICATIONS VOID THE GUARANTEE.

 

 

Water temperature exceeds the set 

temperature. 

Malfunctioning or damaged 

thermoregulator 

Repair or replace 

thermoregulator (service). 

Safety  valve  does  not  open  (also  if 
attempting to blow it through).

 

Blocked safety valve.

 

Clean the valve or replace it.

 

Safety valve is leaking. 

1)  Faying  surface  of  the  safety 
valve is dirty or damaged. 
2) Water pressure too high 

1) Clean or run in the faying surface of the 
safety valve.  
2) Use a pressure regulator. 

Water in the heater is dirty. 

Large quantities of sediment in 
the 

container 

or 

worn 

magnesium anode. 

Clean  the  container  to  remove  sediment 
or 

replace 

the 

magnesium 

anode 

(excluded from the guarantee). 

vent

vent 

 heat pump

radiators

C/H boiler

 solar system

 heat pump

radiators

C/H boiler

 solar system

magnezium anode

sensor cover R1/2 "

H.C.W outflow 3/4"

cirkulation R3/4"

cold water inflow R3/4"

1"

1"

1"

1"

1"

3/4"

3/4"

3/4"

3/4"

1"

1"

1"

5/4"

5/4"

5/4"

5/4"

5/4"

5/4"

5/4"

5/4"

5/4"

5/4"

Summary of Contents for SGWK 300/80

Page 1: ...0 Glubczyce Raciborska str 36 tel 48 077 403 45 00 Storage tank type SGW S K USER S GUIDE GUARANTEE CERTIFICATE Cat No Factory No TYPE Exchangers with a spiral coil Exchangers with two spiral coil 300 80 380 120 500 160 600 200 800 200 1000 200 ...

Page 2: ...Because of its construction the heater can be assembled only VERTICALLY Connect the internal tank with possibility of disconnection e g for maintenance directly to the water supply system with pressure not more than 0 6 MPa the minimum pressure cannot be lower than 0 1 MPa ca 1 bar If the pressure in the water supply system is more than 0 6 MPa it is necessary to reduce it by application of a pres...

Page 3: ...Then turn the hood in the opposite direction until it clicks in the previous position and press it down to the valve body Note there is a possibility of hot water discharge The company disclaims any responsibility for malfunctioning of the safety valve resulting from incorrect valve fitting The maximum pressure of fully open safety valve cannot exceed 0 67 MPa for C H containers however for buffer...

Page 4: ...nsure free access e g for maintenance repairs or replacement The manufacturer is not responsible for any possible inconvenience or costs resulting from casing disassembly 8 The guarantee for the sold consumer product does not exclude limit or suspend any rights of the buyer resulting from inconsistency of the product with the agreement Guarantee for storage tank 24 months UNAUTHORISED REPAIRS OR M...

Reviews: