©GAMPRODUCTS 8/12
Page 2 of 2
FLICKER / STROBE GENERATOR
INCANDESCENT
FLUORESCENT
LED
REMOTE OPERATION OPTION
To control the ON/OFF function remotely, you will need a male
phone jack plug (1/8”
/
3.17 mm) for the remote receptacle
on front panel.
1. Turn ON/OFF by simply using a switch to OPEN/CLOSE
the loop.
MODE
DMX CHANNEL
FUNCTION
DIM
1
Dim level
FLICKER
1
Dim level
2
Control low level
3
Control rate/speed
STROBE
1
Control intensity
2
Control low level
3
Control rate/speed
DMX OPERATION OPTION
•
Requires 3 Channels
1. Set all dials to the OFF position and
DMX counter to desired DMX channel.
2. Plug in power (Red Output LED)
Status LED is green when DMX is present.
3. Plug in device or fixture.
4. Start channel controls DIM level
(Start c 1) = controls low level
(Start c 2) = controls rate/speed
Start channel can be any valid DMX# 1-510
BACK VIEW
