background image

 
 
Acquaer Kft. 

                                                                                          www.gamagarden.eu 

H-4

900, Fehérgyarmat, Szatmári utca

 11. 

 

 

 

 

 

•  Replace damaged or worn parts. Only use spare parts recommended 

by the manu-facturer. The use of other parts can lead to personal injury 

or material damage. 

 

•  Do not use the machine near water, or use it outdoors when it is raining or 

snowing. 

 

•  Store the machine in a dry place out of the reach of children. 

 

•  Check that the infeed is empty before starting the machine. 

 

•  Keep your head and other parts of your body away from the infeed. 

 

•  Keep your hands and other parts of your body, including your clothing, 

away from the infeed, the ejector and moving parts. 

 

•  Always maintain a firm footing and good balance. Do not overreach. 

Never stand higher up than the machine when feeding. 

 

•  Do not stand in front of the infeed when the machine is running. 

 

•  Do not allow processed material to collect in the ejector. This can prevent 

proper emptying and could result in the backflow of material through the 

infeed. 

 

•  If the machine gets blocked, switch off and unplug the power cord 

before clearing the blockage. 

 

•  The safety devices must be fitted correctly and work properly. 

 

•  Be careful when working near the roller and the fixed blade. The 

roller can move even when the motor is not running. 

 

•  Switch off the machine and unplug the power cord before fitting/removing 

the collector funnel. 

 

•  WARNING: Keep plastic bags from the packaging out of the reach of 

children 

– risk of suffocation. 

Summary of Contents for GSS2500


















Reviews: