Fig.5
19
20
21
22
23
24
25
26
27
28
29
32
31
33
30
EN
Thank you for having purchased this GAMA by GAMA.PROFESSIONAL product. We are sure that
you will appreciate all the care that has gone into its design and manufacture. GAMA by
GAMA.PROFESSIONAL research constantly combines innovation and technology to offer
premium-quality products. Excellent performance is guaranteed since we apply the most
advanced methods and use the best materials. This guarantees excellent performance, designed
for the most demanding clients who wish to achieve excellent results both in the salon and at
home. Please read these instructions carefully before use, and keep them for future reference.
WARNING:
READ CAREFULLY BEFORE USING THE APPLIANCE.
SAVE THESE INSTRUCTIONS.
1-
Do not use the appliance with wet hands, in a damp
environment or on wet surfaces. Do not immerse the
appliance in water or other liquids.
2-
Do not use this
appliance near bathtubs or other vessels containing
water.
3-
Unplug the appliance from the power
outlet when it is off because proximity to water
could pose a threat; be extra careful when using it
in the bathroom.
4-
Do not use this electric
appliance if it has been in contact with liquids, if its
electric cord is damaged or if its body and/or
accessories show clear signs of damage. If the
appliance does not work properly, disconnect it from
the power outlet immediately and take it to an
approved service centre.
5-
- If the electric cord is
damaged, it must be replaced immediately by the
manufacturer or qualified persons in order to avoid a
hazard.
6-
Keep the appliance and its electric cord away
from sources of heat and from heat-sensitive surfaces
(plastic, vinyl, etc.).
7-
Do not hold or handle the appliance
by the electric cord. Do not wind the electric cord around
the appliance, bend it or twist it so as not to impair its
correct functioning and thus damage the hair dryer. Lack
of compliance with the above warnings and instructions
could cause a short circuit and thus irreparable damage
to the hair dryer, as well as put the user’s safety at risk.
8-
If the electric cord shows any signs of damage or wear, it
should be replaced by specialised personnel only. Do not
use fittings and/or accessories that have been modified or
that have not been approved by the manufacturer.
9-
Unplug the appliance from the power outlet when not in
use and allow it to cool down before storing it in a safe
place. To disconnect the appliance, unplug the electric
cord from the wall power outlet.
10-
To clean the
appliance, always disconnect it from the power
outlet first and let it cool completely. When
cleaning, do not use aggressive products
containing phenylphenol.
11-
This appliance should
only be used for its intended purpose.
12-
For
additional protection, the installation of a residual
current device (RCD) having a rated residual
operating current not exceeding 30 mA is advisable
in the electrical circuit supplying the bathroom.
Ask your installer for advice.
This appliance must not be used by people with
reduced physical, motor or mental capacity (including
children),
or with limited knowledge of the appliance
itself, unless such people have been trained for its use
or are under adequate supervision to ensure their own
safety. Children must be under supervision at all times
to ensure that they do not play with the appliance.
PRODUCT WARRANTY
The product warranty is governed by regulations in force and applied upon showing the original
legible purchase receipt complete of all its parts. For support service under warranty, please take
the original purchase ticket / sales receipt to the shop where the product was purchased.
The symbol on the product or on the package
indicates that the product should not be
considered as normal domestic waste; once
you have decided to dispose of it, it should be
taken to the proper collection point for recycling
electrical and electronic appliances. When you
dispose of this product correctly, you help prevent
potential negative consequences for the environment
and health, which could derive from improper treatment
of the product. For more detailed information on recycling
this product, contact the municipal office, the local
waste disposal service or the shop where it was purchased.
Do not use this appliance near bathtubs or
other vessels containing water.
This appliance has been designed with a
double-insulation system for your safety.
ERROR RECOGNITION / SELF-DIAGNOSIS
The hair dryer is equipped with multiple sensors that constantly monitor usage parameters. In
case of extreme or unusual use, the hair dryer will stop its operation or not turn on in order to
protect both the user and the product itself. Any anomaly detected by the hair dryer is indicated
by a flashing light code on the handle.
Since some types of anomaly are temporary (for example, an extreme use of the hair dryer which
generates an excess in temperature), we recommend to proceed as follows:
1-
turn the switch to the off position 0.
2-
unplug the appliance from the power outlet.
3-
after a few minutes, connect the appliance to the power outlet again and turn it on.
If the indicator lights stop flashing, the problem is solved. If, on the other hand, they continue
flashing, contact the store's assistance service or, in the case of purchase from the GA.MA’s
online shop, the company's customer care.
N.B.: Since IQ is equipped with a sophisticated and sensitive electronic system, a change in
electrical voltage could cause an error signal and therefore a switch off of the device. This is
functional and it is a self-protection mechanism.
USE INSTRUCTIONS
1 - Make sure that your hands are completely dry
before connecting the appliance to the mains.
2 - Connect the hair dryer and switch the power-
on/lock switch from 0 to I. (Fig.1)
When first switched on, the hair dryer is set with
both air flow and temperature set at the minimum,
corresponding to the first indicator light from the
bottom, next to the side buttons. (Fig.2)
Fig.1
Fig.2
TEMPERATURE SETTINGS
The hair dryer is fitted with 3 temperature levels that can be adjusted by pressing the dedicated
button. By pressing the upper part of the button, the temperature increases as indicated by the 3
red indicator lights. To decrease the temperature, press the bottom part of the button. (Fig.4)
AIR FLOW SPEED
The hair dryer is equipped with an air flow adjustment button.
By pressing the top, the air flow increases as shown by the white indicator lights. To decrease the
flow, press the bottom part of the adjustment button. (Fig.3)
Fig.3
Fig.4
COOL SHOT
You can use the “Cool shot” button during hair drying to promote a
long-lasting style.
To activate this function, simply press and hold the Cool Shot
button. To deactivate it, release the button.
When the Cool Shot is active, the hair dryer blows cold air
regardless of the temperature it is set on. The temperature
indicators flash quickly to indicate the Cool Shot mode as active.
By turning it off, the temperature returns to the previous setting
(Cool Shot mode deactivation). (Fig.5)
LOCK BUTTON
After setting the desired air flow speed and temperature, the
selector buttons can be locked to prevent accidental change
during use. To lock the air speed and temperature selection
buttons, turn the power-on/lock switch to the locking position
(Fig. 6)
While the air speed and temperature selector buttons are locked,
the Cool Shot button/function can still be used.
MEMORY FUNCTION
The iQ has a speed and temperature memorization system. When the product is turned off, the last air
speed and temperature settings are stored, so that when the dryer is turned back on, it automatically
goes back to those saved settings.
However, if the dryer is disconnected from the plug, the factory setting will be restored.
Fig.6
ACCESSORIES
• 2
concentrator
nozzles
• 1
diffuser
VENTURI EFFECT
IQ’s shape allows an easier Venturi
effect, i.e. the spreading of a higher air
flow due to the suction effect without
requiring and therefore consuming
additional energy. (Fig.13)
IMPORTANT:
Use only original GAMA accessories.
On the website
www.gamaprofessional.com
it is possible to download the product’s digital use
and maintenance manual.
CLEANING AND MAINTENANCE
The iQ possesses a unique micro-perforated filter, designed specifically to trap even the tiniest
dirt particles and impurities from the environment. By preventing the passage of environmental
pollutants to the engine and hair, it protects the hairdryer’s motor and increases its life, while
also preventing dirt from reaching the hair and scalp during the styling phase, thus protecting
its health and promoting its shine. Therefore, the daily cleaning of the micro-perforated filter is
essential to maintaining the correct functioning of the product and ensuring its long-lasting
performance.
The proper cleaning of the filter is absolutely necessary to optimize the micro-perforated
filter’s function and hence, protect the hairdryer’s motor.
WARNING,
the accumulation of dirt resulting from the improper cleaning of the filter may result in
engine damage and affect the hairdryer’s performance. As a protection measure, in case of
excessive accumulation of dirt in the filter, the hairdryer’s intelligent digital interface may turn off
the dryer in order to protect the motor.
When this happens, a white LED light will
turn on indicating that the filter must be
cleaned immediately.
(Fig.7)
fig. 7
MICRO-PERFORATED METAL FILTER’S CORRECT CLEANING PROCESS – MMF
This process consists of two easy steps: Manual Cleaning and Auto-Cleaning function.
MANUAL CLEANING
1) Carefully remove the external back filter by turning the metal ring carefully in a
counter-clockwise direction (Fig. 8).
2) Clean the metal filter by using a brush first and then finishing with a clean cloth, making sure
that any dirt that is lodged in the filter is removed. We highly recommend moistening the cloth with
isopropyl alcohol, which acts as degreaser and removes any possible residues.
For professional users, the manual cleaning process must be done daily. For domestic use,
it can be done weekly.
AUTO CLEANING FUNCTION
Please follow the few steps listed below:
1)
Carefully remove the external back filter by turning the metal ring in a counter-clockwise
direction (Fig. 8).
2)
Without accessories attached to the dryer (such as nozzles or diffusor), turn the dryer on
(position 1) for a few seconds to ensure that there are no hair residues or dust left on the main air
outlet.
3)
Then turn the hairdryer off and proceed to press and hold the top speed selection button for 7
seconds (Fig. 9).
4)
The dryer will then automatically start blowing air in reverse direction, towards the back of the
dryer. The air pressure should remove all the dirt caught in the filter. The auto-cleaning cycle will
last 15 seconds, the amount necessary to guarantee the correct cleaning of the filter after
intensive professional use. During this process, make sure you keep both the air outlet and the air
inlet free from obstructions and away from any surface or exposed to any hair chemical airborne
products, such a hairsprays.
Fig.8
7s.
Fig.9
We recommend using the auto-cleaning function after each use.
At the end of the AUTOCLEANING session:
1) Reposition the external rear ring nut, taking care to reposition it in the right direction (just check
that the positioning occurs easily, without friction or pressure). CAUTION: if inserted in the wrong
direction (on the slightly narrower side), the applied pressure could damage the piece and/or
cause it to break. (Fig.10)
2) Reposition the metal ring containing the external filter by making its two interlocking tabs
coincide with the two plastic slots on the product body, and rotate it clockwise. (Fig.11)
At this point the self-cleaning procedure will be completed and the hair dryer can be used
normally.
Fig.10
Fig.11
INSTRUCTIONS FOR INSERTING THE ACCESSORIES
To insert both concentrator nozzle and diffuser, simply apply a light pressure.
The accessories must be inserted gently, without too much force and
in such a way as to leave
a thin space between the metal ring on the front of the hair dryer and the accessory itself.
(Fig.12)
The IQ accessories have a conical, non-traditional (mechanical or magnetic) coupling that allows
users to securely fix the accessories simply by applying a light pressure.
Fig.13
BRUSHING SETTING
Due to the iQ’s exceptional air flow and pressure, we highly recommend a unique brushing setting
to guarantee the hair’s protection and optimize the hairdryer’s performance. The recommended
brushing position is the 2nd temperature level for regular types of hair and 1st temperature level
for those with fine hair.
Fig.12
