2. Installation
A.
Use the solar module to mark and drill the 3 mounting holes plus 1 hole for the
electric cord (as shown in figure 2).
Use 1/4" holes for the cord and:
1/16" holes for the mounting holes on wooden sheds
3/8" holes for the mounting holes on metal sheds
3/8" holes for the mounting holes on resin sheds.
B.
Slide the cord through the cord hole.
Mount the solar module using 3 screws* to fasten the solar module to the
exterior wall (as shown in figure 3).
Figure 2
Figure 3
* Included in the kit
3. Solar Panel Adjustment
Position the solar panel facing the south*. For your
convenience use the compass located on top.
Adjust the solar panel to 45° to collect maximum solar
energy.
The solar module can swivel 360° and 180° for
optimum adjustment (as shown in figure 4).
* Countries on the southern part of the planet should
face the solar panel to the North.
Figure 4
