Parts Identification
& Manual Service
19/40
Issue 1.0
Mechanical (with Electrical Motor)
Maximum working pressure: _________________ 232,5 kgf/cm2 (22,8 MPa) / 3306 psi /228 bar
Max. Production:_____________________________________________ 5,7 l/min / 1,51 gal/min
Maximum PCD size: ________________________________________________ 1 gun
→
0,036”
_______________________________________________________________ 2 guns
→
0,026”
Electric Motor Power: ____________________________________ 4,02 HP / 3 kW (220v 50 Hz)
Approximate weight (hydraulic tank empty): _____________________________ 66 kg / 145,5 lb
Approximate weight (hydraulic tank full): ______________________________ 70,4 kg / 155,2 lb
Hydraulic tank capacity: _______________________________________________ 5 l / 1,32 gal
Mechanical (with Gasoline Engine)
Maximum working pressure: ________________ 232,5 kgf/cm2 (22,8 MPa) / 3306 psi / 228 bar
Max. Production:_____________________________________________ 6,4 l/min / 1,69 gal/min
Maximum PCD size: ________________________________________________ 1 gun
→
0,043”
_______________________________________________________________ 2 guns
→
0,033”
Gasoline Motor Power: _____________________________________________ 5,5 HP / 4,1 kW
Approximate weight (hydraulic & gasoline tanks empty): ___________________ 72 kg / 158,7 lb
Approximate weight (hydraulic & gasoline tanks full): ______________________ 78,5 kg / 173 lb
Hydraulic tank capacity: _______________________________________________ 5 l / 1,32 gal
Gasoline tank capacity: ________________________________________________ 3 l / 0,8 gal
Hydraulic oil type: ______________ DIN 51524 standard, section 1 & 2 (for example ISO VG 46)
Gasoline Fuel type (*): ___________________________________ E5 (95/98 octane without oil)
Motor Lubricant (*): ___________________________________________________ SAE 10/30W
(*) Only GA-200 G model
Dimensions: ___________________________________________________ H: 1352 mm / 53 in
W: 945 mm / 37 in
L: 745 mm / 29 in
TECHNICAL SPECIFICATIONS