Parts Identification
& Manual Service
3/40
Issue 1.0
All information provided in this Service Manual is assumed to be correct; although this does not
constitute any implicit or explicit liability or guarantee. HI-TECH reserves the right at any time
and without prior warning to make all improvements and modifications necessary to this Service
Manual, in order to rectify any possible typographical errors, supplement the information
contained or insert changes predicated by the performance or use of the unit.
The
GA-200 Hydraulic Airless
series metering unit has been designed and manufactured in
full compliance to the provisions of Machine Directive 89/392/CEE in its modified form and the
National Regulations that transpose it. It also meets all European Directives concerning
electromagnetic compatibility and electrical safety and the provisions of the Harmonised Norms
that are applicable.
This chapter contains information on the safety, handling and use of the
GA-200 Hydraulic
Airless
series metering unit.
Before installing the unit and starting it up, carefully read all the technical
and safety documentation included in this manual. Pay special attention
to the information to know and understand the operation and the
conditions of use of the unit. All of the information is aimed at enhancing
User Safety and avoiding possible breakdowns derived from the incorrect
use of the unit.
WARNING!
Establishes information to alert on a situation that might cause serious
injuries if the instructions are not followed.
PRECAUTION!
Establishes information that indicates how to avoid damage to the unit
or how to avoid a situation that could cause minor injuries.
NB:
is relevant information on a procedure being carried out.
Careful study of this manual will enable the operator to know the characteristics of the unit and
the operating procedures. By following the instructions and recommendations contained herein,
you will reduce the potential risk of accidents in the installation, use or maintenance of the unit;
you will provide a better opportunity for incident-free operation for a longer time, greater output
and the possibility of detecting and resolving problems fast and simply.
Keep this Service Manual for future consultation of useful information at all times. If you lose
this manual, ask for a new copy from your
HI-TECH
local distributor or directly contact
HI-TECH
SPRAY EQUIPMENT.
WARNING!
The design of the GA-200 Hydraulic Airless series metering unit does not
allow its use in potentially explosive atmospheres or to exceed the pressure and
temperature limits described in the technical specifications of this manual.
SAFETY AND HANDLING
