21
Copyright © GamaBit Ltd. 2017 - 2020. All right reserved.
Binding is a logical connection between two devices. For example, an illuminating device
can turn on/off the luminaries with which it is bound, depending on the level of
illumination.
This section is accessible only from the Houseper application. It features a list of devices
suitable for binding with the current device.
1.
Device.
2.
Binding status.
3.
Binding functionality.
4.
Bind button - connects devices over relevant functionalities.
5.
Unbind button - removes binding between devices over relevant functionalities.
The "Devices Suitable for Binding" section is not displayed when there are no suitable
devices available.
4.2.3 Device Information
The section contains basic device information and possibility to change the device name
and/or room location.
4.2.4 Device Configuration
Device configuration usually provides the following information:
Hidden devices will not be displayed in the list of devices on the first page of the
Devices tab when there is an active filter. For example, a light switch that is
bound with a lighting unit and has no other functionality. It serves to manage the
luminaries with which it is bound, but it does not give us any additional information
and cannot be controlled. Therefore, its presence in the list of devices is totally
useless and you can configure it as "hidden". Hidden Device Configuration is
designed simply for convenience and can be changed at any time.
Sleeping Device marks devices that are not permanently connected to the network.
They communicate with the controller at a certain time to perform their predefined
tasks (measurement, reporting, etc.) and/or in cases of emergency events (to
report them). When "asleep" they are inaccessible and even leave the Zigbee
network temporarily. The "sleep" function saves the batteries of the devices for a
very long period of time. The longer the device sleeps, the slower the battery is
exhausted. Some devices wake up so often that their sleeping times are