31
Copyright © GamaBit Ltd. 2017 - 2020. All right reserved.
would be exactly the same blue colour that has been pre-selected, with the
appropriate level, hue and saturation set in the beginning).
2.
Scene name and description (if available).
3.
The Edit button allows you to change the name and/or description of an existing
scene.
4.
IR commands – you can use this button to add IR commands to the scene. For
example, if you already have a "Turn All Off " scene and add an IR device in which
you have configured the Stop Air Conditioner command. When you add this
command to the "Turn Off All" scene, in addition to stopping the device already
defined, it will turn off the air conditioner as well.
5.
The Devices button lets you view a list of all devices included in the scene and
change them if necessary. You can remove devices, add new ones or use the
Overwrite button to change the predefined mode of a device with its current
settings.
6.
Scene Delete button.
With the Remove All Scenes button, you can delete all scenes.
6 Alarms
Active alarms are listed together with an option to be deleted. All alarms received are
displayed together in one row. For example, for a certain device we can have “fire” and
“tamper” on one row and a “battery low” on another. It is also important to note that
there are no special listings for “armed device" if devices are not armed. For example, if
an open door detector is disarmed because you are at home and you are continually
opening and closing doors it will not be marked as an active alarm.
1.
The alarm indicators and the alarm date.
2.
Name and room location of the device.