36
Copyright © GamaBit Ltd. 2017 - 2020. All right reserved.
o
From 06: 00h to 22: 00h - daytime;
o
From 22: 00h to 24: 00h - nighttime.
When adding a new period (with the button
) use the black sliders marked with 2 at
the picture below or select the value you want to change (marked with 1 at the picture
below) - an additional dialogue box will open for precise time selection.
1.
End of the period - the beginning of the period is the end of the previous one or
00:00h if this is the first period. It is also a button that allows you to make changes.
2.
Sliders for end-of-period configuration.
3.
Buttons for adding a new period - when active they are coloured in the
corresponding to the period colour. In order to be active, these buttons must differ
from the last period entered, the end of the last period being before 24:00h.
4.
Delete the last period button.
When the period bar is filled through 24:00h, they can be added.
10 Rooms
The term "room" is conditional and serves to identify a physical location. It could be a
real room such as a kitchen, living room, bathroom, an open space (yard, pool, garden,
roof) or even an auxiliary building (workshop, greenhouse). Each device can be assigned
a "room" in which it is physically located. Rooms are used as Additional Information for
faster device identification. For example, when you have multiple identical devices located
in different rooms.
The room and device names serve as primary identifiers for the device.
You can add, remove and change rooms at any time.
There is a predefined pack of rooms that will be offered to you. If you decide to take
advantage of them, you should know that they do not differ in any way from the rooms
you can create. They can be deleted and changed like all other rooms.
11 Recent Actions