G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
CENTRIC 3x480, User Guide, rel. 1.7
15
On all screens other than the main menu screen, the current navigation path is displayed in the upper-left
corner of the screen (see Figure 4), making it easy to understand where you are located within the control
system menus.
The navigation path in the upper-left corner of the screen is also used to navigate backwards – to return to
a previous screen or to the main menu. Pressing any of the screen icons in the navigation path moves you
to that screen.
5.2
Main Menu highlights
This section provides a brief overview of the Main Menu options, highlighting the most frequently used
options. (Chapter
7 provides an in-depth look at all of the options.)
5.2.1
Setup
The Setup menu option contains a wide range of functions for setting the operating parameters of the
system. Most of these functions are of interest only to the service technician, but there are a few that may
be of interest to the non-technical user.
For a full description of all of the Setup menu functions, see Chapter
0”.
5.2.1.1
TIME
The Time function under the Setup option is used to set the system date and time.
See section
7.2.7.7 for details.
5.2.1.2
DRY CONTACTS
The Dry Contact function under the Setup option assigns alarm conditions to the output dry contacts. When
the specified alarm occurs, the contact closes. The output dry contacts can be used to trigger external
devices. See section
7.2.10 for details.
