G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
82
CENTRIC 3x480, User Guide, rel. 1.7
7.5.2
Profile > BATTERY
Lists the current values for a number of important battery parameters, including:
•
Nominal charger voltage.
•
Current limit (enabled/disabled).
•
Battery low limit voltage.
•
Current limit values (in amps).
•
Rectifier voltage at battery test.
•
Battery cabinet capacities (in Ah).
•
End-of-backup battery voltage limit.
•
Temperature sensor status (active/inactive).
•
Automatic battery test period (in
weeks).
•
Temperature compensation status (active/inactive).
•
Test duration limit.
•
Temperature compensation factor (mV/°C).
•
Current sensor status (active/inactive).
•
Limit dc voltage at compensation (400 – 440V).
More information about these parameters is available in section
7.2.3 "Setup > DC-DC” on page 35.
7.5.3
Profile > ST.SW.
Lists the current values for several parameters related to the static switch, including:
•
Bypass (forced or controlled).
•
Control by PC activity status (active/inactive).
•
Control by panel activity status (active/inactive).
•
Voltage range (wide/narrow).
•
Frequency range (in Hertz).
•
Integration time (regular/extended).
•
Synchronization sensitivity (regular/extended).
More information about these parameters is available in section
7.2.3 "Setup > DC-DC" on page 35.
7.5.4
Profile > ALARMS
Lists current parameter values, mostly alarm limit values, for alarms, including:
•
Dc voltage high limit.
•
Dc voltage low limit.
•
Ac voltage high limit.
•
Ac voltage low limit.
•
Over temperature limit.
•
Under temperature limit.
•
Ac voltage hysteresis.
Section
7.2.6 "Setup > ALARMS" on page 46 has more information on the parameters displayed in the
"Profile > Alarms" screen.
