G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
Centric 3x480 Vac, Installation Guide, rel. 2.2
1
1. Unpacking instructions
1.
Inspect the shipping crate for any signs of damage that may have occurred while in transit.
Figure 1: Inspect the shipping crate for signs of damage
2.
Inspect the ShockWatch and TiltWatch devices which are adhered to the outside of the wooden
packing crate. Verify that their indicators are not red. A red indicator is a sign of rough handling
(ShockWatch) or tip-over (TiltWatch).
3.
Nnotify the carrier and your dealer immediately if rough handling of the Centric is suspected or if any
damage is found or suspected. Retain the shipping crate and packaging materials for future use.
Figure 2: ShockWatch and TiltWatch devices
(These devices indicate if the package was subject to shock or tip-over.)
4.
Using a fork lift, move the shipping crate close to the place in which the Centric will be installed.
5.
Cut and remove any straps that are on the shipping crate.
6.
Stand on a secure ladder or stool and use an electric screwdriver to remove the screws that are
