G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
CENTRIC User Guide, rel. 3.4
71
7.5
PROFILE
The PROFILE function displays a summary of the operating parameters of various parts of the system.
Figure 51: "Main Menu > Profile" options
7.5.1
Profile > SYSTEM
Lists the current values for a number of basic system settings, including:
•
Nominal power.
•
Number or battery cabinets.
•
Number of phases.
•
Operation mode (stand-alone or parallel).
•
Nominal ac voltage.
•
Automatic restart (enabled/disabled).
•
Nominal frequency.
•
Shutdown by long ac fail (enabled/disabled).
•
Number of modules.
•
Last maintenance date.
•
Number of modules for redundancy.
More information about these parameters is available in section
7.2.1 "Setup > SYSTEM” on page 23.
7.5.2
Profile > BATTERY
Lists the current values for a number of important battery parameters, including:
•
Nominal charger voltage.
•
Current limit (enabled/disabled).
•
Battery low limit voltage.
•
Current limit values (in amps).
•
Rectifier voltage at battery test.
•
Battery cabinet capacities (in Ah).
•
End-of-backup battery voltage limit.
•
Temperature sensor status (active/inactive).
•
Automatic battery test period (in
weeks).
•
Temperature compensation status (active/inactive).
•
Test duration limit.
•
Temperature compensation factor (mV/°C).
•
Current sensor status (active/inactive).
•
Limit dc voltage at compensation (400 – 440V).
More information about these parameters is available in section
7.2.3 "Setup >
BATTERY" on page 30.
